Hand Sanitizer Dispenser/ Disinfection Dispenser
Automatic Disinfection Dispenser Model ES-F1301:
Automatic Disinfection Dispenser Model ES-F1303A:
Automatic Disinfection Dispenser Model ES-F1303A:
Capacity:1000ML
Color: golden
Installation: wall mounted
Battery: 4*size C batteries
Spray
Suport AC/DC adapter
Available liquid : liquid soap ,shampoo,cleanser
Characteristic :
1.Touch free,to avoid the spread of germs by touching .
2.Built-in infrared sensor.Use of advanced chips,and performance more stable.
3.Unique design make it better security in public places.4.Power(4*1.5V), super-long battery life ,also support AC/DC
Capacity:1000ML
Color: golden
Installation: wall mounted
Battery: 4*size C batteries
Spray
Suport AC/DC adapter
Available liquid : liquid soap ,shampoo,cleanser
Characteristic :
1.Touch free,to avoid the spread of germs by touching .
2.Built-in infrared sensor.Use of advanced chips,and performance more stable.
3.Unique design make it better security in public places.4.Power(4*1.5V), super-long battery life ,also support AC/DC
Automatic Spary Alcohol Hand Sanitizer dispenser Model ES-0318:
Installation method:
1. Fixed hole position in the installation position. And drill a hole with the diameter of 3-6MM, fixed with the rubber plug and screws.
2. Face fixed disinfector slot with fixed screw, insert from bottom to up
Method of use:
1. Open the machine, put disinfectant into it, closed the former shell. Power-on reset: indictor bright for 1s, said machine self-inspection normal.
2. Normal scans: indicator flash at every 1.6S (8MS), that machine is in normal scans (infrared sensor continuously scanning with the interval of 800MS.
3. Induction to human signal:
(1) First detect the position of switch stall (left, right.)
(2) If in the left, gear motor driving a one-line, spray once.
(3) If in the right file, motor drive spray once, 700MS delay, after testing scanning time, if induction human body, make a second injection.
(4) Motor cycle (a complete movement once or twice by switching to evacuate, system delay 2s to evacuate, then re-enter the scanning cycle. If human is still not evacuated after 2S, the red light will continuous high-strobe with 40MS interval, until the body evacuated, during high-strobe, the motor will not drive jet., in order to save disinfectant.
4. Fault alarm: if the system mechanical transmission parts is damaged, red light will make slow low-frequency flashing warning with the interval of 1s, after failure for 5s.
5. This system software, a built-in correction for long-term stable job, when the battery runs out, will slow or does not reach the designated position, you need replace batteries.
6. When the red lights flashing for a long time, please replace the new battery.
7. The new battery replacement method: open the battery lid, hand battery replacement battery box, pull out a new battery, the battery using 3rd.
8. Put the key on the cover lock, counter-clockwise, then lock body, vice verse can open it.
Technical parameters:
Voltage: 6V DC voltage
Capacity: 750ML
Induction distance: 3-6CMFluid volume: 2-3ML/times
1. Fixed hole position in the installation position. And drill a hole with the diameter of 3-6MM, fixed with the rubber plug and screws.
2. Face fixed disinfector slot with fixed screw, insert from bottom to up
Method of use:
1. Open the machine, put disinfectant into it, closed the former shell. Power-on reset: indictor bright for 1s, said machine self-inspection normal.
2. Normal scans: indicator flash at every 1.6S (8MS), that machine is in normal scans (infrared sensor continuously scanning with the interval of 800MS.
3. Induction to human signal:
(1) First detect the position of switch stall (left, right.)
(2) If in the left, gear motor driving a one-line, spray once.
(3) If in the right file, motor drive spray once, 700MS delay, after testing scanning time, if induction human body, make a second injection.
(4) Motor cycle (a complete movement once or twice by switching to evacuate, system delay 2s to evacuate, then re-enter the scanning cycle. If human is still not evacuated after 2S, the red light will continuous high-strobe with 40MS interval, until the body evacuated, during high-strobe, the motor will not drive jet., in order to save disinfectant.
4. Fault alarm: if the system mechanical transmission parts is damaged, red light will make slow low-frequency flashing warning with the interval of 1s, after failure for 5s.
5. This system software, a built-in correction for long-term stable job, when the battery runs out, will slow or does not reach the designated position, you need replace batteries.
6. When the red lights flashing for a long time, please replace the new battery.
7. The new battery replacement method: open the battery lid, hand battery replacement battery box, pull out a new battery, the battery using 3rd.
8. Put the key on the cover lock, counter-clockwise, then lock body, vice verse can open it.
Technical parameters:
Voltage: 6V DC voltage
Capacity: 750ML
Induction distance: 3-6CMFluid volume: 2-3ML/times
Automatic Spary Alcohol Hand Sanitizer dispenser Model ES-0858:
Alcohol hand sanitizer dispenser &inductive hand disinfect& ionautomatic induction hand disinfection machine &automatic touchless sanitizer despensor&Wall Mounted Hand Sanitizer Dispensers&alcohol hand sanitizer dispensers& automatic hand disinfector
Model ES-KP0858
Use 4 size '"D" batteres.
this model use partition-type sensor, Reaction is very sensitive and quick spraying directly on your skin,Completing the disinfection within 30 seconds,Killing 99.6% of the surface bacteria on your skin,Restaining sustainably the bacteria within 6 hours after disinfection,There in no undesirable side effects,Volatilization is speed,There is no need washing and drying,The effect is good,the cost is low.
Installation method:
1. Fixed hole position in the installation position,thenn drill 3 hole with the diameter of 3-6MM, then fixed the hanging panel with the plastic plugs and screws attched with the machine.
2.Aline the fixed notch of the disinfector with the installed screws,then insert the screws from down to up.
Method of use:
1.Put 4 Size D dry batteries to the the battery box on the left side.
2.Open the machine, put disinfectant into it, closed the former shell.
3.Make the swich on,then put the hand within the sensor distance,the liquid will spray automatically.
This model use partition-type sensor, reaction is very sensitive and quick :Beside the nozzle;in the middle;below near the tray,which with the dark red colors,are all sensors.When you put your hand near ,or under the sensor,it can spray automatically.
4. This system software, a built-in correction for long-term stable job, when the battery runs out, will slow or does not reach the designated position, you need replace batteries.
5. When the red lights flashing for a long time, please replace the new battery.
6. The new battery replacement method: open the battery lid, hand battery replacement battery box, pull out a new battery, the battery using 1rd.
7. Put the key on the cover lock, counter-clockwise, then lock body, vice verse can open it.
Technical parameters:
Voltage: 6V DC voltage
Capacity: 800ML
Induction distance: 3-15CMFluid volume: 2-3ML/times
Model ES-KP0858
Use 4 size '"D" batteres.
this model use partition-type sensor, Reaction is very sensitive and quick spraying directly on your skin,Completing the disinfection within 30 seconds,Killing 99.6% of the surface bacteria on your skin,Restaining sustainably the bacteria within 6 hours after disinfection,There in no undesirable side effects,Volatilization is speed,There is no need washing and drying,The effect is good,the cost is low.
Installation method:
1. Fixed hole position in the installation position,thenn drill 3 hole with the diameter of 3-6MM, then fixed the hanging panel with the plastic plugs and screws attched with the machine.
2.Aline the fixed notch of the disinfector with the installed screws,then insert the screws from down to up.
Method of use:
1.Put 4 Size D dry batteries to the the battery box on the left side.
2.Open the machine, put disinfectant into it, closed the former shell.
3.Make the swich on,then put the hand within the sensor distance,the liquid will spray automatically.
This model use partition-type sensor, reaction is very sensitive and quick :Beside the nozzle;in the middle;below near the tray,which with the dark red colors,are all sensors.When you put your hand near ,or under the sensor,it can spray automatically.
4. This system software, a built-in correction for long-term stable job, when the battery runs out, will slow or does not reach the designated position, you need replace batteries.
5. When the red lights flashing for a long time, please replace the new battery.
6. The new battery replacement method: open the battery lid, hand battery replacement battery box, pull out a new battery, the battery using 1rd.
7. Put the key on the cover lock, counter-clockwise, then lock body, vice verse can open it.
Technical parameters:
Voltage: 6V DC voltage
Capacity: 800ML
Induction distance: 3-15CMFluid volume: 2-3ML/times
Muti-function Foam soap or Sanitizer Spray dispenser:
Automatic Disinfection Dispenser Model ES-230:
Automatic Disinfection Dispenser Model ES-230:
Capacity: 1000ml
Product size: L14 W9.5 H24 cm
Use 4*AA batteries
Power<10W
Noisy : <40dB Sensor Length: 3-8 cm
Voltage: DC 4 X 1.5V
Capability:1000 ML
Drop:0.3-0.5ML
Color: white
Volume:1000ml
Material:ABS
Packing:1piece/case,QTY:24 PCS Carton size: 39*42*54CM
Feature:
1.Stand on or wall-mounted
2.can load alcohol,disinfectant,medchine and so on.
Widely used in hotel,office building,hospitals,bookstore,home,square,coach teminal,airport,film,beer bar,bookstore,restaurant,freeway service area and some other pulbic place.
*The appearance design,beaufiful generous,both in Europe and elegant style,but also noble spirit of China.*Make your life more healthy and confortable.
Capacity: 1000ml
Product size: L14 W9.5 H24 cm
Use 4*AA batteries
Power<10W
Noisy : <40dB Sensor Length: 3-8 cm
Voltage: DC 4 X 1.5V
Capability:1000 ML
Drop:0.3-0.5ML
Color: white
Volume:1000ml
Material:ABS
Packing:1piece/case,QTY:24 PCS Carton size: 39*42*54CM
Feature:
1.Stand on or wall-mounted
2.can load alcohol,disinfectant,medchine and so on.
Widely used in hotel,office building,hospitals,bookstore,home,square,coach teminal,airport,film,beer bar,bookstore,restaurant,freeway service area and some other pulbic place.
*The appearance design,beaufiful generous,both in Europe and elegant style,but also noble spirit of China.*Make your life more healthy and confortable.
Automatic Disinfection Dispenser Model ES-238:
Automatic Disinfection Dispenser Model ES-238 :
Product size: L23 W17 H38.5 cm
Power: 220V+_50%, 50H
Power<50W
Noisy <48dB
Sensor Length: 0.3-0.5 cm
Capability: 1700 ML
Sensor Length: 5-10 cm
Capability:1700 ML
Drop:0.3-0.5ML
Type:wall-mounted
Color: white
Dimension:230*170*185mm
Packing:4pcs/ctn
Power:220V+_50%,,50Hz
Feature:can load alcohol,disinfectant,medchine and so on.
Widely used in hotel,office building,hospitals,bookstore,home,square,coach teminal,airport,film,beer bar,bookstore,restaurant,freeway service area and some other pulbic place.
Feature:
*PC transparent material,strong and durable,simple operation,reliable performance,never leakage.
*The appearance design,beaufiful generous,both in Europe and elegant style,but also noble spirit of China.
*Make your life more warm and confortable.
Automatic hand disinfector
Prepare for use
1.Put in 75% alcohol for the disinfection of dispenser itself,poure it in 30 minutes
2.Repoure disinfectant and connect it to power
3.Be careful don't let liquid pass the red warning line
4.Covered with lids in the end
use
1.Turn on the switch
2.When in standby station,the indicator emitting green or blue light
3.When your hand nearing infraed sensors window,the machine will emitte disinfectant and at the same time there is a red light emitting from the infraed sensors4.when the capacity of the disinfectant under 100ml,you should add disinfectant
Product size: L23 W17 H38.5 cm
Power: 220V+_50%, 50H
Power<50W
Noisy <48dB
Sensor Length: 0.3-0.5 cm
Capability: 1700 ML
Sensor Length: 5-10 cm
Capability:1700 ML
Drop:0.3-0.5ML
Type:wall-mounted
Color: white
Dimension:230*170*185mm
Packing:4pcs/ctn
Power:220V+_50%,,50Hz
Feature:can load alcohol,disinfectant,medchine and so on.
Widely used in hotel,office building,hospitals,bookstore,home,square,coach teminal,airport,film,beer bar,bookstore,restaurant,freeway service area and some other pulbic place.
Feature:
*PC transparent material,strong and durable,simple operation,reliable performance,never leakage.
*The appearance design,beaufiful generous,both in Europe and elegant style,but also noble spirit of China.
*Make your life more warm and confortable.
Automatic hand disinfector
Prepare for use
1.Put in 75% alcohol for the disinfection of dispenser itself,poure it in 30 minutes
2.Repoure disinfectant and connect it to power
3.Be careful don't let liquid pass the red warning line
4.Covered with lids in the end
use
1.Turn on the switch
2.When in standby station,the indicator emitting green or blue light
3.When your hand nearing infraed sensors window,the machine will emitte disinfectant and at the same time there is a red light emitting from the infraed sensors4.when the capacity of the disinfectant under 100ml,you should add disinfectant
Automatic Disinfection Dispenser Model ES-239:
Automatic Disinfection Dispenser Model ES-239 :
Product size: L25 W15.5 H32.5 cm
Power: 220V+_50%, 50H
Power<50W
Noisy <48dB
Sensor Length: 5-10 cm
Capability: 3500 ML
Drop:.0.3-0.55ML
QTY:2 PCS
Product size: L25 W15.5 H32.5 cm
Power: 220V+_50%, 50H
Power<50W
Noisy <48dB
Sensor Length: 5-10 cm
Capability: 3500 ML
Drop:.0.3-0.55ML
QTY:2 PCS
Manual Disinfection Dispenser Model ES-2009 (520ml):
Manual Disinfection Dispenser Model EA-OK-2009 (520ml): Product size: L10 W14 H20 cm
Sensor Length: 5-10 cm
Capability: 520 ML
Drop: 0.3-0.5ML
QTY: 50 PCS
Color: white
Material:ABS
Packing:50pcs/ctn
Widely used in hotel,office building,hospitals,bookstore,home,square,coach teminal,airport,film,beer bar,bookstore,restaurant,freeway service area and some other pulbic place.
Feature:
*Stand on
*Can load alcohol,disinfectant,medchine and so on.
*PC transparent material,strong and durable,simple operation,reliable performance,never leakage.
*The appearance design,beaufiful generous,both in Europe and elegant style,but also noble spirit of China.*Make your life more warm and confortable.
Sensor Length: 5-10 cm
Capability: 520 ML
Drop: 0.3-0.5ML
QTY: 50 PCS
Color: white
Material:ABS
Packing:50pcs/ctn
Widely used in hotel,office building,hospitals,bookstore,home,square,coach teminal,airport,film,beer bar,bookstore,restaurant,freeway service area and some other pulbic place.
Feature:
*Stand on
*Can load alcohol,disinfectant,medchine and so on.
*PC transparent material,strong and durable,simple operation,reliable performance,never leakage.
*The appearance design,beaufiful generous,both in Europe and elegant style,but also noble spirit of China.*Make your life more warm and confortable.
Hand Sanitizer dispenser or Toilet Seat Cover Sanitizer dispenser
Manual Hand Sanitizer dispenser or Manual Toilet Seat Cover Sanitizer dispenser Model ES-4100M (450ml):
Manual Toilet Seat Cover Sanitizer dispenser Model ES-SA-4100M (450ml): 1 size: 9.2(length)*9.2(width)*23(height)cm
2 the dispenser is a simple push-type alcohol sanitizer. Certain amount of alcohol will spray out every time when pushed.
3 PP materials meet the environmental standard.
4 matching with 450ml alcohol refill
2 the dispenser is a simple push-type alcohol sanitizer. Certain amount of alcohol will spray out every time when pushed.
3 PP materials meet the environmental standard.
4 matching with 450ml alcohol refill
Automatic Hand Sanitizer dispenser or Automatic Toilet Seat Cover Sanitizer dispenser Model ES-4100S(450ml):
Automatic Toilet Seat Cover Sanitizer dispenser Model ES-SA-4100S(450ml): 1 size: 9.2(length)*9.2(width)*23(height)
2 there are red and green LED on the dispenser. Sanitizing liquid will spray and green LED will flash when the infrared sensor works. When the red LED flashes, it’s time to check if the refill can is used out.
3 effective range of infrared sensor is within 100mm. working of sensor is controlled by solenoid valve. The alcohol sanitizing liquid sprays at an induction interval of 2 second.
4 four AA alkaline batteries are used, offering a power of 3 volt.
5 PP materials are up to the environmental standard.
6 matching with alcohol refill (450ml)
2 there are red and green LED on the dispenser. Sanitizing liquid will spray and green LED will flash when the infrared sensor works. When the red LED flashes, it’s time to check if the refill can is used out.
3 effective range of infrared sensor is within 100mm. working of sensor is controlled by solenoid valve. The alcohol sanitizing liquid sprays at an induction interval of 2 second.
4 four AA alkaline batteries are used, offering a power of 3 volt.
5 PP materials are up to the environmental standard.
6 matching with alcohol refill (450ml)